Design Summary

Front Back

General

Design Name
DRO Switch_2018-03-25.zip
Designer
Design Upload Date
2018-03-26 04:53:46
Board Dimensions
3.94 by 3.15 inches
Open Source
Yes
License
Creative Commons Attribution 4.0 International

PCB Properties

Copper Layers
2
Thickness
1.6 mm
Minimum Trace/Spacing
6/6 mil
Minimum Hole Size
0.3 mm
Impedance Control
No
Soldermask Colour
Green
Silkscreen Colour
White
Surface Finish
HASL (with lead)
Copper Weight
1 oz
Cost of 5 PCBs

Designer's Description

This design allows two sets of encoders attached to, for example a lathe and milling machine, to be connected to a single DRO. A toggle switch digitally routes the selected set to the Digital Readout Unit.

The PCB is designed to mount directly to the DRO connectors which also provide power. The direct mounting means the board will only fit to DRO consoles with 25.4mm (1") vertical spacing between the 9-Way D-type connectors.

Renderings

Front

Front

This is a rendering of the front of your PCB.

Back

Back

This is a rendering of the back of your PCB.

Layer Renderings

Outline

Outline

Top Copper

Top Copper

Bottom Copper

Bottom Copper

Drill File

Drill File

Top Soldermask

Top Soldermask

Bottom Soldermask

Bottom Soldermask

Top Silkscreen

Top Silkscreen

Bottom Silkscreen

Bottom Silkscreen